Wellcome to our Danfoss MASSFLO MASS 3000 Flowmeter page, Dear guest , you are seeing our second hand Danfoss industrial product . The picture is originaly products itself . You can check test reports below .There is no warranty for second hand products. But if you like your technical people can visit ourworkshop and test it by theirselves . Otherwise our decleration is valid . Danfoss industrial products web site >. Our company doensn't provide technical support for this product. Please understand this point (this condition does not cover the Danfoss devices we sell new ones). If you are not very familiar with the device, you can check the user manual below and get informed and make a purchase. Our web site in not an advertasing site . It contains only our inventory
The ultrasonic clamp-on flow meter SONOFLOW CO.55 measures the flow rate of liquids in flexible plastic tubing fast and reliably. The non-invasive sensor does not have any contact to the medium and is particularly suited for applications with strict hygienic standards. The clamp-on mounting concept eliminates any risk of contamination or leakage.
Efficient metering and designThe flow is measured using bi-directional ultrasound based on the transit time method, with proven long-term stability and accuracy. All circuits for calculating and measuring are collected on a single board, providing a compact and rational design in addition to an exceptionally high level of measuring accuracy and reliability.
The MX-3 data logger allows reading of Modbus and M-Bus devices, analog inputs and register the data and sending it to remote users / server through Modbus GPRS modem. It also provides SMS sending services for alarm events. Data logger can read Kamstrup, Sensus, DIEHL, Danfoss, Itron, Landis & Gyr and other meters (like exotic meters / industrial meters). Also MX-3 can control and read other controllers like Danfoss ECL 300.
Data logger MX-3 is dedicated for real time logging and analyzing of data. Using GPRS/GSM, logger sends data to remote users / server. Data Logger MX-3 can also communicate with other controllers and sensors. Device has wide range of optional interfaces and protocols and can read any kind of meters, controllers and sensors equipped with standard protocols. Perfect for telemetry/monitoring, control and smart metering.
Below indicated few samples how MX-3 collects the data from meters / sensors and controllers and sends the data to local or remote users using Modbus protocol via GPRS / GSM. There is so many ways to use our MX-3. Starting from smart metering, heating substation metering, data acquisition from temperature, pressure sensors, data acquisition from weather stations and sensors, agro monitoring, chemical monitoring and telemetry, to smart house telemetry, and scientific device monitoring and telemetry. 2b1af7f3a8